manualshive.com logo in svg

Blackbox AVSC-HDMI2-8X2, User Manual, Page: 10 / 44

Share
Download
Blackbox AVSC-HDMI2-8X2 User Manual Download Page 10

10

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 2: OVERVIEW

TABLE 2-2 (CONTINUED). BACK-PANEL COMPONENTS

  NUMBER IN  
  FIGURE 2-2

  COMPONENT

DESCRIPTION

  3

  Audio Output

•  1: One balanced audio output (5-pin) and one digital SPDIF audio output for 1-HDMI 

output audio de-embedding.

•  2: One balanced audio output (5-pin) and one digital SPDIF audio output for 2-HDBT 

output audio de-embedding.

  4

  

Control

•  RS-232: 3-pin terminal block to connect the control device (e.g. PC) to control the 

switcher by sending RS232 commands. It also supports RS-232 passthrough control.

• RELAY 1-2: Two 3-pin terminal blocks to connect the relay devices (e.g. projector screen).
• IR EYE: 3.5-mm jack to connect IR receiver to control the switcher by the IR remote.
• TCP/IP: RJ-45 port to connect the control device (e.g. PC) to control the switcher by GUI.
• FIRMWARE: Type-A USB port for firmware upgrade.

  5

  

24-VDC connector

DC barrel connector for the included power adapter

Summary of Contents for AVSC-HDMI2-8X2













































Reviews:

No comments