SERVSWITCH
BRAND DVI KVM EXTENDER FAMILY
38
Auto Configuration
Use the Auto Configuration submenu to define whether the Local unit carries out
automatic detection of the number of pixels per line and the best phase after a mode
change (a change of screen resolution and/or refresh rate at the graphic source).
Using automatic detection (while displaying an appropriate test pattern) ensures an
optimized image but the procedure introduces a delay in the picture appearing on the remote
console screen. If you want the picture to appear as fast as possible, and can tolerate a non-
optimized image, you may want to disable this feature. Please note that Auto Configuration is
disabled in the default factory settings.
To view the Auto Configuration menu, select the Tools icon from the main menu and then
select the Auto Configuration icon.
Figure 18
Auto-Configuration submenu
Disable Automatic detection of pixels per
line and phase after a mode change
Enable Automatic detection of pixels per
line and phase after a mode change
Back to Tools menu
Summary of Contents for ACS253A-CT
Page 68: ...NOTES...
