22” Video Screen Manual v1.3 Nov 2017
19
Button Activation
The 22” Screen can be programmed to play content upon button
activation in a number of different ways, the looping function also
allows the creation of an attracter screen which will loop until a
button is activated. The available button options are;
1)
Push to play single file
2)
Push to play folder (a collection of files in order)
3)
Push for next file
4)
Push for previous file
5)
Push to put volume up
6)
Push to put volume down
7)
Push to mute volume
8)
Uninterruptible or interruptible playback (unable to trigger
again during play)
Buttons are programmed using an ‘autoplay.txt’ file that is added to
the SDHC or USB storage device along with your content. There are
templates available under ‘Test Content’ on our support page at:
www.blackboxav.co.uk/support
A configuration file will appear as follows (create a .txt file by right
clicking on desktop > new > text document):
irmode=1
(puts the VC-HD in button mode)
01=01/
(button 1 plays all files in folder ‘01’)
02[n]=02/video1.mpg
(button 2 plays specific video in folder
‘02’)
NEXT=3
(button 3 plays next file)
PREV=4
(button 4 plays previous file)
vol_plus=5
(button 5 puts volume up)
vol_minus=6
(button 6 puts volume down)
MUTE=7
(button 7 mutes volume)
