9
5.
RS232: 3-pin Euroblock connector for connecting the included RS-232 cable. You can
connect to a computer to issue RS-232 commands to the matrix or can connect a
third party device and send RS-232 commands to that device. Refer to the
RS-232
CONTROL section for details.
6.
FW: USB Type-A connector for connecting a computer to perform firmware
updates. See the
FIRMWARE UPGRADE section for details.
7.
TCP/IP: RJ45 jack for connecting the matrix to your home network using an Ethernet
cable (available separately) for computer control using the built-in web GUI. See the
WEB GUI CONTROL section for details.
8.
DC 24V: DC barrel connector for connecting the included AC power adapter.
IR Remote Control
1.
STANDBY: Press the STANDBY button to turn the matrix on
or to put it into standby mode.
2.
INPUTS: Eight numbered buttons corresponding to the eight
inputs.
3.
OUTPUTS: Eight numbered buttons corresponding to the
eight outputs.
4.
MENU:
•
ALL: The ALL button can be used to select all INPUTS for
EDID® management or all OUTPUTS for switching.
•
EDID: The EDID button is used to set the EDID for one or
more INPUTS to the EDID capabilities of the selected
OUTPUT.
•
CLEAR: The CLEAR button is used to cancel a change in
progress.
•
ENTER: The ENTER button is used to accept the change.