6
4. Select the Beacon Interval by entering the button combination listed in the table
below:
Button Entry
Interval
A 1
Minute
B 5
Minutes
A&B 10
Minutes
C 15
Minutes
B&C 30
Minutes
C&D 45
Minutes
D 60
Minutes
Power Disable
Beacon Interval
5. The beacon interval is indicated by a quick flash of the TX LED every 2 seconds
when not transmitting. When BAT is configured for beacon intervals greater than 1
minute, GPS periodically shuts down between transmissions to conserve power
(LEDs are inactive during this time). User-initiated transmissions can be made at any
time BAT is not actively transmitting. Transmission (in progress) is indicated by a
solidly illuminated TX LED.
NOTE: The selected Beacon Mode persists through power cycles.
Emergency Mode
—To activate Emergency Mode, perform one of the following:
• Hold the Emergency button for 4 seconds (from power on or off position).
• Press and hold A&D simultaneously when BAT is powered on.
Entry
Indication of Emergency Mode Entry
A
&
D
Both LEDs flash for 4 seconds, followed by 16
seconds of solid illumination and then SOS distinctive
vibrations (3 short / 3 long / 3 short) occur.
Emergency
(for 4 seconds)
SOS distinctive vibrations (3 short / 3 long / 3 short)
occur.
Emergency Mode
