4
LED Indicators
—BAT is equipped with two LED indicators. The left LED indicates GPS status
(RED or GREEN), and the right LED indicates transmission (TX) status (BLUE).
LED
Action
LED Status
GPS
Acquiring GPS
Rapid triple RED flash every 2 seconds
GPS
GPS acquired with
Error
≥
50M
Double GREEN flash every 2 seconds
GPS
GPS acquired with
Error < 50M
Single GREEN flash every 2 seconds
TX
Preparing to transmit Flashing BLUE
TX
Transmission in
progress
Solid BLUE
TX
Satellite transmit
failure detected
Constant rapid BLUE flashing
BOTH
Emergency Mode
started via A&D or
Emergency button
Flash in unison for 4 seconds
BOTH
Emergency beacon in
progress
Solid on
BOTH
Hardware failure
Continuously flash in unison
immediately following power on
Transmission Status
Vibration Indicators
—BAT is equipped with a vibration motor, which indicates power on, power
off, and transmission sent. A single vibration indicates power on and transmission sent, while a
double vibration indicates power off.
LED Settings
—BAT is equipped with three LED settings: Visible, Infrared, and Off. The default
mode is Visible. The user can toggle through the modes by pressing the LED button located
above the GPS and TX LEDs. When BAT is in Infrared LED setting, the LED flashes are
displayed in white and can only be viewed using infrared goggles or through some digital
camera lenses.
NOTE: The Infrared and Off LED settings are only available in Normal Mode.
NOTE: The selected LED setting persists through power cycles.