Blackbird Technologies Blackbird Asset Tracker, User Manual, Page: 5 / 12

3
BAT DIAGRAM
BASIC USAGE
Device Description—
BAT is a small, global positioning system (GPS)-enabled, satellite
transmitter capable of sending its position as well as emergency beacons and brevity
messages.
Batteries—
BAT requires two AA lithium batteries (1.5V only).
To replace the batteries, follow the steps below.
1. Rotate the ¼-turn screw counterclockwise.
2. Remove the battery door.
3. Insert batteries in direction of diagram located in battery casing.
4. Replace door.
5. Rotate the ¼-turn screw clockwise until it clicks.
Power On —
To power on BAT, press and hold Power until a short vibration occurs.
Power Off —
To power off BAT, press and hold Power until the GPS LED extinguishes and two
short vibrations occur.
NOTE: When Emergency Mode is activated, the BAT must be unlocked before Power Off is
functional.