Blackbelt 3D BV Blackbelt, Installation & User Manual

Page: 38 / 109

Version 2020-5.0_ENG
37
3.6.2 Saving a project
If you are happy with the settings and you want to keep these for later, you can save the entire project in Cura as a
*.curaproject.3mf file. This can also be convenient when you want to continue a later time or share your work with
others. The save project function will export the link to the models and keep all the settings. Unique profiles will be
included in the workspace of a second user when accepted (see figure by step 4). You need to use the following
steps to save and load a project file:
1. Choose th e “File” menu in the upper left corner and select “Save Project..”
2. A general save window of your operating system will appear. The file name is auto generated based on the
settings, you can choose to change this, or press “Save”. Make sure you choose a loc ation where you can find
the files again.
3. Open project file by choosing “File” menu and browse to location where you saved the file.
Auto generated file
name
Save project
Save button
Watch for the
conformation
message after
saving
Saved project file
Open button