5
H.264 Network IP Camera User Manual
SECTION 2: INSTALLATION AND SETUP
2.
Install the camera mounting bracket using the instructions provided with the bracket.
3.
Attach the adapter for mounting the camera to side with the label or to the opposite side with the screws provided.
Mounting
adapter
4.
Remove the protective cap covering the camera CCD.
5.
Attach the lens assembly to the camera by screwing it clockwise onto the camera until it is fully seated. The lens may require
a mounting ring adapter to fit onto the camera. Loosen the set screw if necessary.
Mounting ring
Set Screw
Cable for Auto-Iris
6.
Tighten the lens set screw with the hex wrench provided.
