13
H.264 Network IP Camera User Manual
SECTION 2: INSTALLATION AND SETUP
4.
In the IP Setup window, click the
Static
option bullet to select this option.
Static
Option
If you have other compatible, network settings you want to apply to the device, enter them in the appropriate locations. Click
Setup
to save settings.
5.
In the
Login
window, enter the ID and PW (password) for your camera and click
Login
. The default administrator values for
the ID and PW are
root
and
pass
. After entering ID and PW, the IP Setup window closes.
6.
In the IPAdmin Tool window, click
Refresh
and verify that the entry representing the camera now shows the new IP address.
7.
Continue with procedure
2.7 Setup camera Basic Configuration
.
2.6.2 Configuring cameras on networks without DHCP
NOTE
The following procedure works with most networks. For further assistance, contact Technical Support.
Cameras installed on a network without a DHCP server will initially use the factory default static network settings:
IP address:
192.168.0.100
Subnet mask:
255.255.255.0
Gateway:
192.168.0.1
In networks without a DHCP server, cameras must be powered on and reconfigured one at a time to avoid addressing conflicts
between other cameras, or possibly with another device on the network. Configuring the network settings of your cameras includes
these steps:
—
Determine the network settings of your computer.
