2
irritation occurs, seek immediate medical attention.
FIRST AID –EYES:
If battery acid comes in contact with eyes, flush eyes immediately, for a minimum of 15 minutes and seek immediate medical attention.
PRODUCT FEATURES
For all 6Vand 12V lead acid batteries (WET, MF, AGM and GEL);
Voltage auto detection;
No risk of overcharging;
Automatic charge and maintain;
Electronically safe against user error;
Full protected against short circuit and wrong connections;
With a LED indicator;
With quick disconnect leads
OPERATING INSTRUCTIONS
1. Connecting the terminal rings/clamps directly to the corresponding connectors on the battery posts.
Note:
Make sure correct polarity connection before plugging in the AC power.
Position the RED terminal on the POSITIVE post connector
Position the BLACK terminal on the NEGATIVE post connector
2. Connect the AC power cord with the AC power outlet.
3. Unplug the charger from the AC power outlet after every use, or just leave it connected to monitor and maintain the battery.
TECHNICAL DATA:
Input Voltage:
100-240V AC
Output Voltage:
6V DC and 12V DC (Voltage auto detection)
Charging Current:
750mA
Battery Types:
6V/12V lead-acid batteries (WET, MF, AGM and GEL)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Neither Red or Green light on: Charger is not properly connected to AC power. Check outlet and your connection.
Red light flashing: Battery charger has AC power and is functioning correctly. If the red light continues to flash, then either the
battery voltage is too low or the output alligator or accessory ring terminals are not connected correctly.
Red light on steady: Battery is connected properly and the charger is charging the battery. The red light will remain on until the
charger completes the charging stage.
Green light flashing: The battery is greater than 80% charged.
Green light on steady: The charge is complete and the battery is 95-100% charged(Assuming a healthy battery).
