Page 3
091321
1-888-651-3431
USE/INSTALLATION
Step 1.
Attach the 3-Pin System to the ATV’s 2”
receiver and pin into place.
Step 2.
To raise and lower the 3-Pin System,
work the ratchet handle #7 both ways. to
change directions, flip the ratchet lock on the
ratchet gear.
Step 3.
Use the Adjustment Tube #8, 9 to
change the angle of selected implements by
using the Quick Pin #10.
Note : some heavier Implements may need to
contact ground to adjust Quick Pin.
Caution:
Be careful not to get under or between
implement.
Step 4.
Attach implements with 2” ID square
tubes to the 3-Pin System Receiver Tube #1
and lock.
3a.
3a.
3a.