background image

7

USER MANU

AL

1,600 KG 12V DC A-Frame Black Jack Trailer Jack™ User Manual V2.6 ©

Use only with accessories rated to handle the forces exerted by the device during 
operation. Other accessories may break and forcefully launch pieces.

Once the load is lifted to the desired height, support the load with jack stands to 
prevent injury should the jack fail.  Do not work under a load that is supported only by 
a jack.

Ensure that there are no obstructions under the load and that the area is clear before 
lowering it.

Ensure that the lock pin is properly inserted through the inner and outer tubes, and 
that there is no load on the trailer before using the manual drop leg extension.

Do not adjust the drop foot while there is a load on the jack.

8 .   E L E C T R I C A L   S A F E T Y

Disconnect device from power source before cleaning, servicing, changing parts/
accessories or when not in use

Protect yourself against electric shocks when working on electrical equipment.  

Avoid body contact with grounded surfaces.  There is an increased chance of 
electrical shocks if your body is grounded.

Do not expose device to rain or wet conditions.  Water entering a power device will 
increase the risk of electric shock.

Do not disconnect the leads in place of using the ON/OFF switch on the device.  This 
will prevent an accidental startup when the leads are connected to the power supply.

Do not alter any parts of the device or accessories.  All parts and accessories are 
designed with built-in-safety features that may be compromised if altered.

Make certain the power source conforms to requirements of your equipment (see 
Specifications).

Do not operate this device if the leads are frayed or damaged as an electric shock or 
surge may occur, resulting in personal injury or property damage.

Inspect the leads for cracks, fraying or other faults in the insulation before each use.
Discontinue use if the leads feel more than comfortably warm while operating the 
device.

Keep all connections dry and off the ground to reduce the risk of electric shock. Do 
not touch the leads with wet hands.

Summary of Contents for BJTJ-1000



















Reviews: