3
SPACE WALKER -
ITEM CODE: BH65-A
.
Instruction Manual
1. Install the rubber grommets and brass
eyelets onto the aileron servo.
+ This is not a toy
+ Be sure that no other flyers are using your
radio frequency.
+ Do not smoke near fuel
+ Store fuel in a cool, dry place, away from
children and pets.
+ Wear safety glasses.
+The glow plug clip must be securely attached
to the glow plug.
+ Do not flip the propeller with your fingers.
+ Keep loose clothing and wires away from
the propeller.
+ Do not start the engine if people are near.
Do not stand in line with the side of the propel-
ler.
+ Make engine adjustments from behind the
propeller only. Do not reach around the spin-
ning propeller.
SAFETY PRECAUTION.
REPLACEMENT LARGE PARTS
B. Wing panel.
C. Fuselage.
A. Cowling.
D . Horizontal stabilizer.
F. Aluminium wing dihedral brace.
E. Vertical stabilizer
REPLACEMENT SMALL PARTS
INSTALLING THE AILERON SERVOS.
A.
B.
C.
B.
D.
E.
F.
Temporary pin to
keep hinge centered.
8. Spinner.
6. Fuel Tank.
7. Plastic - enginemount.
5.Electric motor ply of wood (A,B).
3x12mm
3x15mm
5x35mm
3x12mm
4.Wheels.
3.Tail gear.
Cut the covering
away from the slot.
Bottom side
Aileron
1. Aluminium landing gear.
2. Wheel pants.