5
RENEGADE -
ITEM CODE:BH66-A
Instruction Manual
INSTALLING THE AILERON CONTROL HORN.
1. Using a ruler & pen to draw a straight
line as below picture.
Install aileron control horn as same
as picture below.
Control horn of Aileron
2 x16mm.
Mark line.
3. Drill through 1.5mm (diameter) the ai-
leron using the control horn as a guide and
screw the control horn in place.
2. Locate nylon control horn, nylon con-
trol horn backplates .
Drill a hole
1.5mm diameter.
Secure.
4. Install control horn as same as picture
below.
Repeat the procedure for the other wing
half
.
2 x 10 mm.
Secure
Bottom side
1. Working with the aileron linkage for
now, thread one clevis onto one of the
threaded wires.
M2 lock nut.
M2 clevis.
Snap keeper.
INSTALLING THE AILERON
LINKAGES.
