Instruction manual PIPER J-3 CUB Item code: BH04
9
5.
Place the servo into the servo tray/ hatch into the
servo box on the bottom of the wing and drill 1.5mm
pilot holes through the tray and servo box for each of
the four mounting screws. Secure the servo tray in
place using the mounting screws provided
2x10mm Tp Screw
- - - - - - - - 8
Warning!
Tie the string.
Pull out servo cord with string.
1
2
o
90
Aileron
approx.16mm
2mm
2
Aileron servos.
2
2x10mm Screw
2
For Aileron.
1.5 mm
2 m m
Screw
1.5 mm
1.5 mm
2
For Aileron.
Bottom view
For Aileron servo
6.
Repeat step # 2 - # 5 to install the second aileron
servo in the opposite wing half.
2x10mm Tp Screw
1
2
For Aileron.
Pay close attention here.
Drill holes using the stated.
(in this case 1.5mm ).
1.5mm
The number of times
the same way Assembly
(in this case twice).
2
X
Assemble left and right
sides the same way.
L
R
Drill holes using the stated.
(in this case 2mm ).
2mm