Instruction manual PIPER J-3 CUB Item code: BH04
19
INSTALLING THE ENGINE
4mm
asher
Flat w
- - - - - - - 4
4mm Spring Washer
- - - - - - - 4
3x25mm Cap Screw
- - - - - - 4
3mm Hex Nut
Size: 46
500mm Pushrod wire
- - - 1
4x25mm Cap Screw
- - - - - 4
3mm Flat washer
- - - - - - - 4
- - - - - - - 4
* Locate the long piece of wire used
for the throttle pushrod. One end of
the wire has been pre-bend in to a
"Z" bend at the factory. This "Z"
bend should be inserted into the
throttle arm of the engine when the
engine is fitted onto the engine
mount. Fit the engine to the engine
mount using the screws provided.
3x25mm Cap Screw
3mm Hex Nut
3mm Flat
washer
Top Side
Secure
4mm Flat Spring
4mm
asher
Flat w
4x25mm
Cap Screw
Pushrod wire