17
Impulse 100TD
- Item code: BH 121
.
Instruction Manual
Horizontal stabilizer installation
See picture below.
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the
servo into the servo tray.
2. Mount the servo to the tray using the
mounting screws provided with your radio
system.
INSTALLING THE ELEVATOR
SERVOS.
E l e v a t o r
servo
HORIZONTAL STABILIZER.
Bottom side.
Cut the covering
away from the slot.
Temporary pin to
keep hinge centered.
Bottom side.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
