15
Focke-Wulf FW190A-
Item code:BH87
INSTRUCTION MANUAL.
INSTALLING THE ENGINE.
Locate the long piece of wire used for the
throttle pushrod. One end of the wire has been
pre-bend in to a “Z” bend at the factory. This
“Z” bend should be inserted into the throttle
arm of the engine when the engine is fitted onto
the engine mount. Fit the engine to the engine
mount using the screws provided.
150mm
Mark point
Drill a hole
4mm diameter.
Secure
4 x 30mm
COWLING.
Top side
Right side
Left side