Instruction manual FIESELER Fi156C STORCH Item code: BH99
1) Install the rubber grommets and brass collets into
the elevator, rudder and throttle servos. Test fit the
servos into the servo tray. Trim the tray if necessary to
fit your servos.
2) Mount the servo to the tray using the mounting
screws provided with your radio system.
90
o
approx.16mm
2mm
4
2mm
2mm
For r
udder servo
INSTALLING THE FUSELAGE SERVOS
11
Cut off shaded
portion carefully.
The number of times
the same way Assembly
(in this case twice).
4
X
Must be purchased
separately!
X
Drill holes using the stated.
(in this case 2mm ).
2mm
Bottom view
L
R
4
3x12mm
Screw
C.A
