Instruction Manual.
9
Steering arm.
INSTALLING THE SPINNER.
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
1) Using a modeling knife, remove the
covering from over the two main gear mounting
slots located in the bottom of the fuselage.
2) Using the two landing gear straps as a
guide, mark the locations of the four mounting
screws onto the fuselage surface.
3) The landing gear wire is held in place
using two nylon landing gear straps and four
wood screws.
MAIN GEAR INSTALLATION.
