EXCEL 2000.
10
HORIZONTAL STABILIZER.
1) Using a ruler and a pen, locate the
centerline of the horizontal stabilizer, at the
trailing edge, and place a mark. Use a traingle
and extend this mark, from back to front,
across the top of the stabilizer. Also extend
this mark down the back of the trailing edge of
the stabilizer.
Center line.
3) Slide the stabilizer into place the
fuselage. Use a pen and draw lines onto the
stabilizer where it and the fuselage sides meet.
Remove covering.
2) Using a modeling knife, carefully remove
the covering from over the vertical stabilizer
mounting slot in the top of the fuselage.
The top of the stabilizer does not have
the hinge pins exposed.
Pen.
4) Remove the stabilizer. Using the lines
you just drew as a guide, carefully remove the
covering from between them using a model-
ing knife.
ELEVATOR SERVO INSTALLATION.
See pictures below:
Elevator servo.
