8
. Item code: BH163
DORNIER DO335
1) Install the rubber grommets and
brass collets into the elevator, rudder
and throttle servos. Test ?t the servos
into the servo tray. Trim the tray if
necessary to ?t your servos.
2) Mount the servo to the tray using
the mounting screws provided with
your radio system.
5. INSTALLING THE FUSELAGE SERVOS
Fuselage top side
Nose gear servo
Elevator servo
Rudder servo
3x12mm.
Secure
5)
enlarge the four holes in the cowling.
Drill four 2.5mm pilot holes through both side of the cowl and the side edges of the firewall. Using a 3mm drill bit,
