6
CHIPMUNK
-Item code BH44.
INSTRUCTION MANUAL.
3. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.
4. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Electric wire.
Thread.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
2x10mm.
Aileron.
Secure
Secure
Install aileron control horn as same
as picture below.
Control horn of Aileron
INSTALLING THE AILERON CONTROL HORN.
A+B Epoxy
PLUS
glue
A+B Epoxy
PLUS
glue
