P47-THUNDERBOLT
.
Item code: BH36-B.
Instruction Manual
13
1. RUDDER CONTROL HORN INSTALLATION
Rudder control horn install as same as method of
elevator control horn.
3. RUDDER PUSHROD INSTALLATION
Rudder pushrod install as same as the way of elevator
pushrod. Please see pictures below.
2. MOUNTINg THE TAIL WHEEL BRACkET
1)
Set the tail wheel assembly in place on the ply-
wood plate. The pivot point of the tail wheel wire should
be even with the rudder hinge line and the tail wheel
bracket should be centered on the plywood plate.
2. Push in
1. A+B Epoxy glue
Control horn
Push in
2. Secure the tail wheel bracket in place using
three 3mm x 12mm wood screws. Be careful not to
overtighten the screws.
Rudder pushrod
Rudder pushrod
3 x 12mm
Secure
