SBACH 342 Item code: BH174A
Instruction Manual
29
30
1. Plug the throttle servo into the receiver and turn on the radio system. Check to ensure that the throttle servo
output shaft is moving in the correct direction. When the throttle stick is moved forward from idle to full throttle,
the throttle barrel should also open and close using this motion. If not, reverse the direction of the servo, using
the transmitter.
Clunks
- - - 1
- - - 1
Fuel Tank
INSTALLING THE THROTTLE
2mm
2mm
Linkage
stopper
4x4mm
2x10mm
2mm
Pushrod wire
Screw
Adjust the throttle input (trans-
mitter throttle stick), throttle trim
movement and the carburattor
opening to the suitable position
and screw in the 4x4mm set
screw.
Connector
Zip tie
Silicone Tube
Fuel Tank
