16
RADIAL ROCKET Item code: BH155
.
Instruction Manual
1)
We highly recommend setting up a plane using
the control throws listed.
2)
The control throws should be measured at the
widest point of each control surface.
3)
Check to be sure the control surfaces move in
the correct directions.
Control throw Ailerons:
Low: 10mm up / down.
High: 12mm up / down.
Control throw Flaps:
Mid: 16mm down.
Control throw Elevators:
Low: 8mm up / down.
High: 10mm up / down.
Control throw Rudder:
Low: 20mm left / right.
High: 22mm left / right.
CONTROL THROWS
10mm
10mm
16mm
8mm
8mm
20mm
20mm
Flap control
Aileron control
Elevator control
Rudder control
PRE-FLIgHT CHECK
1)
Completely charge your transmitter and receiver
batteries before your first day of flying.
2)
Check every bolt and every glue joint in your
plane to ensure that everything is tight and well bonded.
3)
Double check the balance of the airplane.
4)
Check the control surface.
5)
Check the receiver antenna. It should be fully
extended and not coiled up inside the fuselage.
6)
Properly balance the propeller.
We wish you many safe and enjoyable
flights with your
RADIAL ROCKET.
95mm
CG