Black Horse Model A6M ZERO, Instruction Manual Book

Page: 46 / 51

1)
We highly recommend setting up a plane using
the control throws listed.
2)
The control throws should be measured at the
widest point of each control surface.
3)
Check to be sure the control surfaces move in the
correct directions.
CONTROL THROWS
Aileron: 14 14 mm down
Elevator: mm up 12 mm down
Rudder: mm right mm left
mm up
12
25 25
Flap: 28 mm down for take off
Low rate:
14mm
Aileron control
14mm
12mm
12mm
Elevator
25mm
25mm
Rudder control
28mm
Flap
Aileron: 20 mm up 20 mm down
Elevator: 18 mm up 18 mm down
Rudder: 45 mm right 45 mm left
Flap:
70 mm down for landing
High rate:
PRE-FLIGHT CHECK
1)
Completely charge your transmitter and
receiver batteries before your first day of flying.
2)
Check every bolt and every glue joint in your
plane to ensure that everything is tight and well
bonded.
3)
Double check the balance of the airplane.
4)
Check the control surface.
5)
Check the receiver antenna. It should be fully
extended and not coiled up inside the fuselage.
6)
Properly balance the propeller.
INSTRUCTION MANUAL A6M ZERO Item code: BH180
In order to obtain the CG specified, reposition
the receiver and other equipment.
If not obtain the CG specified, add a weight and
adjust.
Do not fly before confirming the
correct location of the CG. If the
CG is incorrect, you lose control
of your airplane which leads to
accidents.
Bottom View
CG
46