5
WESTLAND WYVERN
- Item code:BH112
INSTRUCTION MANUAL.
2) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
3) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
4. Instal servo tray with aileron servo into
the wing as same as picture below.
2.INSTALLING THE AILERON CONTROL HORN.
Temporary pin to
keep hinge centered.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Cut the covering
away from the slot.
Secure.
Aileron
control horn
A+B Epoxy
PLUS
glue
Electric wire
Thread
