27
WESTLAND WYVERN
- Item code:BH112
INSTRUCTION MANUAL.
MOUNTING THE TAIL WHEEL
BRACKET.
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket
should be centered on the plywood plate.
3x15mm
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
3. Secure the tail wheel bracket in place
using four 3mm x 15mm wood screws. Be
careful not to overtighten the screws.
Secure.
C/A glue
C/A glue
Bottom side
