5
L-39 ALBATROS
Item code: BH141
.
Instruction Manual
1) Install the rubber grommets and brass
eyelets onto the aileron servos.
I. AILERON.
1.INSTALLING THE AILERON SERVOS.
2) Using a modeling knife, remove the cov-
ering at possition show below.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
Aileron
Flap
Servo tray.
Remove
covering
Servo tray.
Secure.
thread
Electric
wire.
Top side
