18
SU 26M-EP -
Item code: BH97
.
Instruction Manual
PRE-FLIGHT CHECK.
1) Completely charge your transmitter and
receiver batteries before your first day of fly-
ing.
2) Check every bolt and every glue joint in
your plane to ensure that everything is tight
and well bonded.
3) Double check the balance of the
airplane.
6) Properly balance the propeller.
We wish you many safe and enjoyable
flights with your EDGE 540 V3-EP
4) Check the control surface.
5) Check the receiver antenna . It should
be fully extended and not coiled up inside the
fuselage.
CONTROL THROWS.
1) We highly recommend setting up a
plane using the control throws listed.
2) The control throws should be meas-
ured at the widest point of each control sur-
face.
3) Check to be sure the control surfaces
move in the correct directions.
Ailerons : 10mm up 10mm down
Elevator : 15mm up 15 mm down
Rudder : 30mm right 30mm left
*If possible, first attempt to balance the model
by changing the position of the receiver bat-
tery and receiver. If you are unable to obtain
good balance by doing so, then it will be nec-
essary to add weight to the nose or tail to
achieve the proper balance point.
30mm
30mm
15mm
15mm
10mm
10mm
