Black+Decker PRJE700, Original Instructions Manual

Page: 6 / 28

(Original instructions)
ENGLISH
6
• The juice extractor cannot process
bananas, peaches, apricots, mangos,
Papayas, etc. because no juice can be
squeezed from those fruits.
• The juice extractor cannot process
coconut or other hard items because
they may damage the motor and filter.
• Skins must be removed from citrus
fruits, remove pits from cherries. Prunes,
etc. before feeding them into the funnel.
• The juice extractor is not suitable for
processing succulent fruits or fruits with
low juice viscosity, such as watermelons,
oranges, etc.
• Switch the power ON.
• Insert the prepared fruits into the
feeding funnel and gently push the
plunger down.
• When residue or juice cups are full,
switch the power OFF and empty the
containers before continuing to process.
Warning!
Grater has sharp blades - always
use pusher, be careful of moving parts.
Keep fingers out of feeder and discharge
openings. Unplug unit before cleaning and
before assembling and removing parts.
Warning!
Do not run juicer continuously
for longer than 60 seconds. Turn off switch
and let it rest for at least 15 minutes to cool
down the motor, and to clean.
Helpful hints and tips
• The best results are obtained when
using young and particularly fresh
vegetables and fruits. In general, the
softer the vegetable and riper the fruit,
the thicker and less clear the juice
will be.
• Wash fruits and vegetables and dry
them well, if possible.
• Cut fruits and carrots into strips.
• Roll leafy vegetables into clumps.
Cleaning and maintenance
Warning! Before cleaning and maintenance,
switch the appliance off and remove the
plug from the socket.
Warning! Allow the unit to thoroughly cool
down before attempting to clean it.
• Open the securing clamps, remove the
container cover, upper body and the
filter. Clean these parts under running
water. Do not use a dishwasher or very
hot water.
• To clean the filter, a small toothbrush
(not included) is recommended.
Warning!
do not immerse motor housing
in water or any other liquid. Motor must
always be kept dry.
• Use a damp cloth to clean the motor
housing.
• Do not use abrasive cleaners or
scouring pads to clean the unit.
• Keep the power cord clean and dry,
otherwise it may cause problems.
• Reassemble all parts in proper order
and store the appliance in a dry place.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.