Inspection and repairs
• Switch off the appliance before cleaning, changing
accessories or approaching parts which move in use
• Before use, check the appliance for damaged or
defective parts. Check for breakage of parts, damage to
switches and any other conditions that may affect its
operation.
• Do not use the appliance if any part is damaged or
defective.
• Do not use the appliance if the blade is damaged.
• Have any damaged or defective parts repaired or
replaced by an authorised repair agent.
• Before use, check the power supply cord for signs of
damage, ageing and wear.
• Do not use the appliance if the power supply cord or
mains plug is damaged or defective.
• If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair
agent in order to avoid a hazard. Do not cut the power
supply cord and do not attempt to repair it yourself.
• Never attempt to remove or replace any parts other than
those specified in this manual.
Electrical safety
Before use, check that the mains voltage corresponds to the
voltage on the rating plate.
This appliance is double insulated in accordance
with EN 60335-2-14; therefore no earth wire is
required.
• To avoid the risk of electric shock, do not immerse the
cord, plug or motor unit in water or other liquid.
• Check that the supply voltage shown on the rating plate
of the appliance matches that of your electrical system.
Any connection error will invalidate the guarantee.
Features
A. Filler Cap
B. Lid
C. Blender jug
D. Jug base
E. Jug seal
F. Blade holder
G. Blade
H. Motor coupling
I. Food processor body
J. Control knob
K. Mincer jug lid
L. Mincer jug
M. Mincer blade
N. Mincer blade holder
O. Grinder jug
P. Grinder blade
Q. Grinder blade holder
R. Mincer spatula
S. Food processor jug
T. Blade holder
U. Emulsifier
V. Kneading blade
W. Stainless steel chopping blade
X. Grating disc
Y. Food processor jug lid
Z. Pusher
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal of the new
plug.
• Connect the blue lead to the neutral terminal.
• If the product is class I (earthed), connect the
green/yellow lead to the earth terminal.
Warning
! If your product is class II double insulated (only 2
wires in the cord set), no connection is to be made to the
earth terminal
• Follow the fitting instructions supplied with good quality
plugs
• Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Warning
! The above section on mains plug replacement is
for authorized service centre personals.
Assembly
1. Wash all detachable parts (see chapter ‘Maintenance
and cleaning’).
2. For the food processor fit the required accessory blade
(U, V, W or X) onto the blade holder (T). fit the assembled
blade holder into the food processor jug (S)s
3. For the blender fit the jug seal (E) around the base of the
blender blade (G), place the blade (G) into the blade
holder (F) then place the blade holder onto the blender
jug base (D).
4. For the mincer or grinder fit the jug seal (E) into the
required blade holder (N or Q), then place the blade
holder (N or Q) on to the required jug base (L or O).
5. Secure the blade holder (F, N or Q) by turning it anti
clockwise.
5
ENGLISH
(Original instructions)
Summary of Contents for KR40-B5
