background image

ENGLISH • 9

•  Do not fill the dust bowl (3) beyond the end of the 

intake chute.

WET AND DRY PICK UP

•  For everyday spills of dry material, use your appliance 

without the squeegee accessory.

•  CAUTION: Your product is designed for light spills 

only.

•  This vacuum can also be used to pick up everyday 

liquid spills. Use the squeegee accessory on non-

absorbent, hard surfaces.  On absorbent surfaces, 

such as carpet, your appliance will pick up wet spills 

better without the accessory.

•  For best performance on hard surface wet pickups, 

insert squeegee into the bowl nozzle opening.

•  For best results when using this accessory, hold the 

appliance at an angle of 45° and pull it slowly towards you.

•  Do not fill the bowl beyond the end of the intake chute. 

If there is any liquid in the bowl, do not turn the unit 

upside down, sideways, point the nozzle upward, or 

shake the vac excessively.

•  After picking up liquid substances clean the vac and 

filter immediately. Mold and mildew may form if the 

unit is not properly cleaned after wet pickups.

•  If charging in a vertical position, be sure to empty all 

liquid contents to avoid damage to your appliance.

OPTIMIZING THE SUCTION FORCE

In order to keep the suction force optimized, the filter must 

be cleaned regularly during use.

EMPTYING AND CLEANING THE PRODUCT.

WARNING:

 Never use the vac without its filter.

NOTE: 

The filter and foam insert are reusable, do not 

confuse them with a disposable dust bag, and do not throw 

them away when the product is emptied. We recommend 

that you replace the foam insert every 6-9 months 

depending on frequency of use.

•  Figure E - Remove the dust bowl by pressing the bowl 

release button and pulling the bowl straight off. 

•  To replace the dust bowl, place it back onto the handle 

until it “clicks” firmly into position.

•  Figure F - While holding the dust bowl over a 

wastebasket or sink, pull out the filter and foam insert 

to empty the contents of the bowl.

•  Figure G - Empty the dust from the bowl and wash if 

necessary.

•  Figure H - The dust bowl can be washed in warm 

soapy water. Wash the filter and foam insert regularly 

using warm, soapy water and ensure that they are 

completely dry before using again. The cleaner they 

are, the better the product will perform. 

•  Ensure that the dust bowl, filter, and foam insert are 

dry before reattaching.

•  It is very important that the filter is correctly in position 

before use. 

IMPORTANT: 

Maximum dust collection will only be 

obtained with a clean filter and an empty dust bowl. If dust 

begins to fall back out of the product after it is switched off, 

this indicates that the bowl is full and requires emptying.

REPLACING THE FILTER

The foam insert should be replaced every 6 to 9 months 

and whenever worn or damaged. Replacement filter is 

available from your Black+Decker dealer.Visit www.

blackanddecker.com to locate dealers.

•  •   Remove the old filter as described above.

•  •   Fit the new filter as described above.

MAINTENANCE

Bowls and filters can be washed thoroughly; however, use 

only mild soap and a damp cloth to clean the main part of 

the vacuum. Important! To assure product SAFETY and 

RELIABILITY, repairs, maintenance and adjustment (other 

than those listed in this manual) should be performed 

by authorized service centers or other qualified service 

personnel, always using identical replacement parts.

DETECCIÓN DE PROBLEMAS

If the product does not work, follow the instructions below. 

If this does not solve the problem, please contact your local 

BLACK+DECKER repair agent. 

Unit will not start. Battery not charged 

•  Check battery charging requirements.

Battery will not charge. Charger not plugged in

•  Plug charger into a working outlet. Refer to “Important 

Charging Notes” for more details.

•  Check current at receptacle by plugging in a lamp or 

other appliance.

Check to see if eceptacle is connected to a light switch 

which turns power off when you turn out the lights. 

Battery will not charge. Surrounding air temperature 

too hot or too cold

•  Move charger and tool to a surrounding air temperature 

of above 40 degree F (4,5°C) or below 105 degree F 

(+40,5°C).

PROTECTING THE ENVIRONMENT

Separate collection. This product must 

not be disposed of with normal household 

waste. Should you find one day that your 

BLACK+DECKER product needs replacement, 

Summary of Contents for HWVI225J01

















Reviews: