Black+Decker HM4000, Original Instructions Manual

Page: 6 / 24

Use
1. Place the appliance upright on a flat and sturdy surface.
2. Remove the cover and nozzle, turn the water tank
upside down and turn the water inlet plug anti-clockwise.
3. Fill the water tank with water. Water must be clean and
water temperature must not be higher than 40
o
C or
lower than 6
o
C. Replace the water inlet plug to the water
tank. Wipe any water droplet on the water tank and
place it back to the body.
4. Add aroma essence as illustrated if necessary. To add
aroma essence, lift the water tank, use dropper to take
essence and add in to aroma tray. Aroma essence
volume is not expected to be over 1/3 of the aroma box,
plant essential oil is highly recommended, or it is
possible to affect the atomization effect. After that, put
back the water tank.
5. Install the top cover and nozzle to the top of the water
tank.
6. Plug in the appliance, a beeping sound shows that it is
powered on.
7. Touch the switch key shortly to start the appliance and
choose different work modes and press the key for 3
seconds during working mode to stop the appliance.
8. Do not move the appliance before it is switched off and
unplugged. The appliance should be moved as a whole.
9. Do not move the appliance during working mode.
Cleaning and maintenance
1. Unplug the appliance before any cleaning and
maintenance.
2. Remove the water inlet plug and flush it with clean
water.
3. Use clean and soft cloth to wipe the touch panel area,
never use wet and rough cloth to avoid any potential
damage to the appliance function.
4. For incrustation on tank and ultrasonic dish, soak it with
citric acid or disincrustant and water (advised water
temperature 40
o
C) in ratio 1/50 for 5 to 10 minutes, then
brush it with brush or cotton swab and wipe it with clean
water.
Note : It is recommended to clean the appliance at least once
a week. Never use any hard item to clean the scaling.
5. Rinse the aroma tray in clean water if necessary.
6. Soak the soft cloth in 40
o
C water and use it to wipe the
surface of the appliance. Never use any hard item to
scratch the appliance.
7. Never clean the appliance with methylbenzene, acid
cleanser, petrol, alcohol or other chemical cleaning
agents.
8. Clean the appliance with neutral cleanser and soft cloth
or sponge.
9. Clean the appliance and pack it in order, if it is not used
for a long time and store it in dry place.
10. Do not clean the appliance with metal scourer or
chemical cleaning agents.
11. Unplug the power plug before any cleaning or
maintenance to avoid electric shock.
12. Wipe the base and touch panel with soft cloth. Do not
wash it with water directly.
6
ENGLISH
(Original instructions)