![background image](http://html1.mh-extra.com/html/black-decker-1/g915/g915_original-instructions-manual_2765771006.webp)
ENGLISH
(Original instructions)
•
Operations for which the power tool
was not designed may create a hazard
and cause personal injury.
•
Do not use accessories which are not
specifically designed and recommended
by the tool manufacturer.
Just because
the accessory can be attached to your
power tool, it does not assure safe
operation.
•
The rated speed of the accessory must
be at least equal to the maximum
speed marked on the power tool.
Accessories running faster than their
rated speed can break and fly apart.
• The outside diameter and the
thickness of your accessory must
be within the capacity rating of
your power tool.
Incorrectly sized
accessories cannot be adequately
guarded or controlled.
•
The arbour size of wheels, flanges,
backing pads or any other accessory
must properly fit the spindle of the
power tool.
Accessories with arbour
holes that do not match the mounting
hardware of the power tool will run out
of balance, vibrate excessively and may
cause loss of control.
•
Do not use a damaged accessory.
Before each use inspect the accessory
such as abrasive wheels for chips
and cracks, backing pad for cracks,
tear or excess wear, wire brush for
loose or cracked wires. If excess
wear, wire brush for loose or cracked
wires. If power tool or accessory is
dropped, inspect for damage or
install an undamaged accessory. After
inspecting and installing an accessory
and run the power tool at maximum
no-load speed for one minute.
Damaged accessories will normally
break apart during this test time.
•
Wear personal protective equipment.
Depending on application,
use face shield, safety goggles
or safety glasses. As appropriate,
wear dust mask, hearing protectors,
gloves and workshop apron hearing
protectors, gloves and workshop
apron capable of stopping small
abrasive or workpiece fragments.
The eye protection must be capable
of stopping flying debris generated
by various operations. The dust mask
or respirator must be capable of
filtering particles generated by your
operation. Prolonged exposure to high
intensity noise may cause hearing loss.
•
Keep bystanders a safe distance away
from work area. Anyone entering
the work area must wear personal
protective equipment.
Fragments
of workpiece or of a broken accessory
may fly away and cause injury beyond
immediate area of operation.
•
Hold the power tool by insulated
gripping surfaces, because the
sanding belt / sanding base may
contact its own cord.
Cutting a “live”
wire may make exposed metal parts
of the power tool “live” could give the
operator an electric shock.
•
Position the cord clear of the spinning
accessory.
If you lose control, the cord
may be cut or snagged and your hand
or arm may be pu lled into the spinning
accessory.
•
Never lay the power tool down until
the accessory has come to a complete
stop.
The spinning accessory may grab
the surface and pull the power tool out
of your control.
•
Do not run the power tool while
carrying it at your side.
Accidental
contact with the spinning accessory
could snag your clothing, pulling the
accessory into your body.
• Regularly clean the power tool’s air
vents.
The motor’s fan will draw the
dust inside the housing and excessive
accumulation of powdered metal may
cause electrical hazards.
•
Do not operate the power tool near
flammable materials.
Sparks could
ignite these materials.
•
Do not use accessories that require
liquid coolants.
Using water or
other liquid coolants may result in
electrocution or shock.
6
Summary of Contents for G915
