background image

4

ENGLISH

Intended use

Your BLACK+DECKER multi-purpose tool has been designed 

for a wide range of DIY applications.

Using the impact drill head this tool is intended for screwdriv-

ing applications and for drilling in wood, metal, plastics and 

soft masonry.

This tool is intended for consumer use only. Your 

Black+Decker charger has been designed for charging 

Black+Decker batteries of the type supplied with this tool.

Safety instructions

General power tool safety warnings

@

Warning! Read all safety warnings and all 

instructions. Failure to follow the warnings and 

instructions listed below may result in electric 

shock, fire and/or serious injury.

Save all warnings and instructions for future reference. 

The term "power tool" in the warnings refers to your mains 

operated (corded) power tool or battery operated (cordless) 

power tool.

1.  Work area safety

a.  Keep work area clean and well lit. Cluttered or dark 

areas invite accidents.

b.  Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases 

or dust. Power tools create sparks which may ignite the 

dust or fumes.

c.  Keep children and bystanders away while operating a 

power tool.  Distractions can cause you to lose control.

2.  Electrical safety

a.  Power tool plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs 

with earthed (grounded) power tools. Unmodified plugs 

and matching outlets will reduce risk of electric shock.

b.  Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators. There is an increased risk of electric shock 

if your body is earthed or grounded.

c.  Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of 

electric shock.

d.  Do not abuse the cord. Never use the cord for carrying, 

pulling or unplugging the power tool. Keep cord away 

from heat, oil, sharp edges or moving parts. Damaged 

or entangled cords increase the risk of electric shock.

e.  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

Multi Tool                                                                   EVO186

Voltage                                       V                             18

Hammer                                                                    
No-load speed                            /min                    0-500/0-1600
Max.torque                                 Nm                          46
Chuck Capacity                          mm                         10
Max Drilling capacity   
Steel/Wood/Masonry                  mm                         10/25/10   
Weight                                         Kg                          1.4 

Charger                                                                                              

Input Voltage                  V                                          100-240                
Output Voltage               V                                          8-20       
Current                                                                       400mA 
Approx. charge time                                                   4Hours      

Battery                                                                       BL1518      

Voltage                                       V                              18                
Capacity                                     Ah                            1.5         
Type                                                                            Li-lon      

EVO186

MULTI TOOL

Technical data

Summary of Contents for EVO186

















Reviews: