Page 20
DEHUMIDIFY
Ideal for reducing humidity.
• Keep window and door closed for the best dehumidifying effect
.
• Exhaust hose attachment is not required to reduce humidity, however it is
recommended in very humid rooms so the warm air can be exhausted outside.
Draining in Dehumidify mode
• It is recommended that the dehumidification drain and drain hose be used for
continuous drainage.
• WATER FULL - When the water level reaches a predetermined level,
will be
indicated on the display. The unit will have to be drained.
NOTE:
· Refer to Water Drainage section page 22.
• In this mode, fan speed is selected automatically by the appliance and can not
be set manually.
FAN
• Press the Fan Speed Button
to select Low, Medium or High Speed.
HEAT
(HEAT model BPT08HWTB only)
• Select the target temperature 55
˚F
- 81
˚F
(13
˚C
-27
˚C
) by pressing the
or
buttons until the desired temperature is displayed on the LED screen.
• Press the Fan Speed Button
to select Low, Medium, High or Auto Speed.
NOTE:
At the beginning of this mode, you may have to wait a few seconds
before the appliance starts to give out hot air.
• In HEAT mode there will be water removed from the air and collected in the
tank, when the tank is full, the appliance shuts down and “ft” (FULL TANK)
appears on the display, the tank must be Emptied (See water drainage page).
The appliance will start up again.
• When operating in very cold rooms, the appliance defrosts automatically
and may disrupt normal operation. The fan will continue operating for a few
seconds to lower the interior.
• Temperature even after the appliance shuts off. In this mode, the fan may
operate for short periods even though the set temperature has been reached.
SET UP & USE
ENGLISH