11
ENGLISH
(Original instructions)
u
Do not take hold of the saw blade after working before it
has cooled. The saw blade becomes very hot while
working.
@
Warning!
Cutting plastics, sap coated wood, and
other materials may cause melted material to
accumulate on the blade tips and the body of the saw blade,
increasing the risk of the blade overheating and binding while
cutting.
Residual risks
The following risks are inherent to the use of saws:
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
u
Injuries caused by touching any rotating/moving parts.
u
Impairment of hearing.
u
Risk of accidents caused by the uncovered parts of the
rotating saw blade.
u
Risk of injury when changing any parts, blades or acces-
sories.
u
Risk of squeezing fingers when opening the guards.
u
Health hazards caused by breathing dust developed when
sawing wood, especially oak, beech and MDF.
u
Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods ensure you take regular
breaks.
Noise
The declared noise emission values have been measured in
accordance with a standard test method and may be used for
comparing one tool with another.
The declared noise emission values may also be used in a
preliminary assessment of exposure.
Warning!
The noise emissions during actual use of the
power tool can differ from the declared values depending
on the ways in which the tool is used especially what kind of
workpiece is processed.
Warning!
Always wear proper personal hearing protec-
tion.
Under some conditions and duration of use, noise from
this product may contribute to hearing loss. Be aware of the
following factors influencing exposure to noise:
u
Use saw blades designed to reduce the emitted noise,
u
Use only well sharpened saw blades, and
u
Use specifically designed noise-reduction saw blades.
Labels on tool
The following pictograms along with the date code are shown
on the tool:
Warning!
To reduce the risk of injury, the user
must read the instruction manual.
Wear safety glasses or goggles
Wear ear protection
Wear a dust mask
This product is not to be used by children
under 16
Keep hands away from blade
No Hands Zone - Keep fingers and arms away
from rotational saw blades
Wear gloves when handling saw blades
Do not stare at operating lamp
Do not expose to rain.
Disconnect the mains plug if the cord
becomes damamged or entangled.
Electrical safety
#
This tool is double insulated; therefore no
earth wire is required. Always check that the
power supply corresponds to the voltage on
the rating plate.
u
If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Voltage drops
Inrush currents cause short-time voltage drops. Under unfa-
vourable power supply conditions, other equipment may be
affected. If the system impedance of the power supply is lower
than 0.178 Ω, disturbances are unlikely to occur.
Using an extension cable
Always use an approved extension cable suitable for the
power input of this tool (see technical data). Before use,
inspect the extension cable for signs of damage, wear and
ageing. Replace the extension cable if damaged or defective.
When using a cable reel, always unwind the cable completely.
Use of an extension cable not suitable for the power input of
the tool or which is damaged or defective may result in a risk
of fire and electric shock.
Features
This tool includes some or all of the following features.
1. Slide bars
Summary of Contents for BES700
Page 1: ...www blackanddecker eu BES700 BES710 ...
Page 3: ...3 17 A 9 B 5 C 33 D 3 E 6 6 6a 6 6a 6a 6 6a F ...
Page 4: ...4 23 23a G 4 4a 4b 4c H 30 13 13a 13c 13b 14 I 31 J 13 13a 13d 13f 13e K 9 7 26 24 L ...
Page 5: ...5 27 25 2 M 20 21 19 N O1 O2 O3 O4 ...
