Black+Decker BDC8, Original Instruction

Page: 8 / 24

ENGLISH
8
(Original instructions)
Unit does not turn on.
Your cooler does not
function(plug is inserted,
LED does not glowafter
sliding the switch to cool
or heat).
There is no voltage flowing
from the 12V socket
(cigarettelighter) in your
vehicle.
The inner fan or the
coolingelement is defective.
The inner fan or the
heating element is
defective.
The cigarette lighter socket
is dirty. This results in a poor
electrical contact. The fuse
of the 12V plug has blown.
The vehicle fuse has blown.
If the plug of your cooler
becomes very warm in the
cigarette lighter socket, either
the socket must be cleaned or
the plug has not been
assembled correctly. Replace
the fuse (6.3A) in the 12V plug.
Replace the vehicle’s 12V socket
fuse (usually 15A). (Please refer
to the operating manual of your
vehicle)
The ignition must be
switched on in most vehicles
for voltageto flow at the
cigarette lighter.Try using
another plug socket.
This can only be repaired
by anauthorised customer
services unit.
This can only be repaired
by anauthorised customer
services unit.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Make sure vehicle is running
or theignition is in the
“accessories” position.
Ensure adapter is correctly
installed.
Check fuse in the tip of the
cigarette lighter adapter.
Replace if needed.
Check fuse for the vehicle
cigarettelighter. Replace if
needed.
Your cooler does not cool
(plug is inserted, LED glows).
Your cooler does not heat
(plug is inserted, LED glows).
Operation with a 12V socket(Cigarette
Lighter):
The ignitionis on and
the cooler is not working.
Pull the plug out of the socket
and make the following checks.