Black+Decker BDC8, Original Instruction

Page: 6 / 24

6
ENGLISH
(Original instructions)
Energy saving tips
• Choose a well ventilated installation
location which is protected against direct
sunlight.
• Allow warm food to cool down first
before placing it in the device to keep
cool.
• Do not open the cooling device more
often than necessary.
• Do not leave the lid open for longer than
necessary.
Use and care
• Do not modify the cooler/warmer in any
way. Unauthorized modification may
impair the function and/or safety and
could affect the life of the equipment.
There are specific applications for which
the cooler/warmer was designed.
• Always check for damaged or worn out
parts before using the cooler/warmer.
Broken parts will affect the operation.
Replace or repair damaged or worn parts
immediately.
• When the cooler/warmer is not in use,
store it in a secure place out of the reach
of children. Inspect it for good working
condition prior to storage and before
reuse.
Warning and notice
For correct operation, please read the
instructions below carefully before using the
appliance. Misuse of the appliance could
cause injuries and damage to the appliance.
• Please ensure the 12V plug is
disconnected from the DC socket after
the engine is turned off.
• Please unplug the 12V plug from the DC
socket when the cooler is not in use.
• Prevent any obstructions to the fan. If
the fan becomes blocked, it can ove
rheat and cause fire. Avoid covering with
towels or cloths.
• Please ensure the sockets of the cords are
inserted firmly. A loose fitting can result
in the cord and sockets over-heating and
failing.
• Keep the appliance away from flammable
items and dampness to prevent any
electrical failure and fire.
• Do not disassemble the appliance.
• Do not switch the setting from cool to
warm immediately. Change between the
settings only after the cooler has been
OFF 30 minutes.
• Do not rinse your cooler in water.
• Avoid turning the cooler upside down.
• Avoid dropping your cooler.
Cleaning and maintenance
• Switch unit off, unplug power cord and
allow it to cool or heat up to room
temperature.
• Wipe the inside with a clean, damp cloth.
Use a mild soap with water if necessary.
Do not use abrasive cleaners, scrubbers
or household chemicals as this may
damage the finish.
• Do not immerse the unit in water.
• It is recommended that the general
condition be examined before it is used.
Keep your cooler and warmer in good
repair by adopting a program of
conscientious repair and maintenance.
Have necessary repairs made by qualified
service personnel.
Protecting the environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your
BLACK+DECKER product needs replace-
ment, or if it is of no further use to you, do
not dispose of it with household waste. Make
this product available for separate collection.