background image

English

4

BATTERIES

The battery pack is not fully charged out of the carton. 

Before using the battery pack, read the safety instructions 
below and then follow charging procedures outlined. When 

ordering replacement battery packs, be sure to include the 
catalog number and voltage.

READ ALL INSTRUCTIONS

Important Safety Instructions for All 
Battery Packs

 

WARNING: Read all safety warnings and all 
instructions for the battery pack, and power tool. 
Failure to follow the warnings and instructions 
may result in electric shock, fire and/or 
serious injury.

• 

Do not charge or use the battery pack in explosive 

atmospheres, such as in the presence of flammable 

liquids, gases or dust.

 Inserting or removing the 

charging cable from the battery pack may ignite the dust 
or fumes.

• 

NEVER force the battery pack into cable insertion 

or tool insertion. DO NOT modify the battery pack 

in any way as battery pack may rupture causing 

serious personal injury.

• 

DO NOT

 splash or immerse in water or other liquids.

• 

Do not store or use the tool and battery pack in 
locations where the temperature may reach or 

exceed 104 °F (40 °C) (such as outside sheds or metal 

buildings in summer).

 For best life store battery packs in 

a cool, dry location.

 

NOTE: Do not store the battery packs in a tool with 
the trigger switch locked on. Never tape the trigger 
switch in the ON position.

• 

Do not incinerate the battery pack even if it is 
severely damaged or is completely worn out.

 The 

battery pack can explode in a fire. Toxic fumes and 

materials are created when lithium ion battery packs 

are burned.

• 

If battery contents come into contact with the skin, 
immediately wash area with mild soap and water. 

If 

battery liquid gets into the eye, rinse water over the open 

eye for 15 minutes or until irritation ceases. If medical 
attention is needed, the battery electrolyte is composed of 
a mixture of liquid organic carbonates and lithium salts.

• 

Contents of opened battery cells may cause 
respiratory irritation.

 Provide fresh air. If symptoms 

persist, seek medical attention.

 

WARNING: 

Burn hazard. Battery liquid may be 

flammable if exposed to spark or flame.

 

WARNING:

 Fire hazard. Never attempt to open the 

battery pack for any reason. If the battery pack case is 

cracked or damaged, do not attempt to use or charge. 

Do not crush, drop or damage the battery pack. Do 
not use a battery pack or charger that has received a 

sharp blow, been dropped, run over or damaged in 
any way (e.g., pierced with a nail, hit with a hammer, 
stepped on). Damaged battery packs should be 
returned to the service center for recycling.

Storage Recommendations

1. The best storage place is one that is cool and dry, away 

from direct sunlight and excess heat or cold.

2.  For long storage, it is recommended to store a fully 

charged battery pack in a cool dry place out of the 
charger for optimal results.

approved safety equipment, such as those dust masks that are 
specially designed to filter out microscopic particles.
• 

Avoid prolonged contact with dust from power 
sanding, sawing, grinding, drilling, and other 
construction activities. Wear protective clothing and 
wash exposed areas with soap and water. 

Allowing 

dust to get into your mouth, eyes, or lay on the skin may 
promote absorption of harmful chemicals.

 

WARNING: 

Use of this tool can generate and/

or disperse dust, which may cause serious and 
permanent respiratory or other injury. Always use 
NIOSH/OSHA approved respiratory protection 
appropriate for the dust exposure. Direct particles 
away from face and body.

 

WARNING: Always wear proper personal hearing 
protection that conforms to ANSI S12.6 (S3.19) 
during use. 

Under some conditions and duration 

of use, noise from this product may contribute to 
hearing loss.

 

CAUTION: When not in use, place tool on its side 
on a stable surface where it will not cause a 
tripping or falling hazard. 

Some tools with large 

battery packs will stand upright on the battery pack 
but may be easily knocked over.

• 

Air vents often cover moving parts and should be 
avoided.

 Loose clothes, jewelry or long hair can be 

caught in moving parts.

 

If use of an extension cord is 

absolutely necessary outdoors, use an extension 
cord suitable for outdoor use.

The label on your tool may include the following symbols. The 
symbols and their definitions are as follows:

V ......................... volts
Hz .......................hertz
min .....................minutes

 or DC ......direct current

 ...................... Class I Construction 

(grounded)

OPM .................... oscillations  per 

minute

A .........................amperes
W ........................watts

 or AC ...........alternating current

 or AC/DC .... alternating  or 

direct current

 ...................... Class  II 

Construction 
(double insulated)

no .......................no load speed

 ......................earthing terminal

 .....................safety alert symbol
 ..................... wear  respiratory 

protection

 ..................... wear  eye 

protection

 ..................... wear  hearing 

protection

 ..................... read  all 

documentation

Summary of Contents for BCW201





































Reviews: