background image

3

DO NOT 

use vacuum cleaner with blocked 

filters. Clean or replace filters before 

continuing. (refer to User Maintenance 

section).

DO NOT 

use vacuum cleaner if the 

appliance malfunctions, sounds abnormal, 

smells, smokes, is dropped or damaged 

in any manner or any breakage is found 

during operation.

DO NOT 

misuse the cord. Never pull the 

appliance by the cord or pull to disconnect 

it from the outlet. Instead, grasp the plug 

and pull to disconnect. 

DO NOT 

use vacuum cleaner to pick up 

large, hard, or sharp objects objects such 

as glass, nails, screws, coins, etc. that are 

likely to cause damage. 

DO NOT 

leave unattended when plugged 

in and/or switched on. 

DO NOT 

use vacuum cleaner if it has 

been dropped, damaged, left outdoors, or 

dropped into liquid (water etc.) 

DO NOT 

close door on cord, or pull cord 

around sharp edges or corners.

DO NOT 

handle the plug or vacuum 

cleaner with wet hands.

DO NOT 

put any objects into openings.

DO NOT 

use with any openings blocked 

and do not restrict airflow. 

DO NOT 

operate the appliance with a 

damaged cord or plug.  

If the supply cord is damaged, it must be 

replaced by the manufacturer, its service 

agent or similarly qualified persons in 

order to avoid a hazard. 

DO NOT 

use without filters in place. 

DO NOT 

attempt to modify this product in 

any way. 

DO 

empty the dust cup and clean the 

filters regularly for optimal operation of the 

vacuum. 

DO 

keep hair, loose clothing, fingers, feet 

and body parts away from openings or 

moving parts. 

DO 

disconnect the appliance from the 

mains supply before connecting the 

flexible suction hose.

DO 

turn off controls before you connect 

or disconnect the appliance to or from the 

mains supply. 

DO disconnect the appliance from the 

power supply when not in use, before 

changing the filters, cleaning the 

filters or connecting/disconnecting the 

accessories. 
DO 

use only on dry, indoor surfaces. 

DO 

use only as described in this manual. 

Use only manufacturer’s recommended 

attachments. 

DO 

keep cord away from heated surfaces. 

DO 

keep all openings free of dust, lint. 

hair, and anything that may reduce airflow. 

DO 

use extra care when vacuuming on 

stairs. 

DO 

keep your work area well lit. 

DO 

store your appliance indoors in a cool, 

dry area. 

DO 

ensure children and babies cannot 

play with plastic bags or any packaging 

materials. 

DO 

operate the appliance from a power 

source of the same voltage, frequency 

and rating as indicated on the product 

identification plate.  

If this appliance is used by a third party, 

DO 

supply the instruction manual with it. No 

liability can be accepted for any damage 

caused by non-compliance with these 

instructions or any other improper use or 

mishandling of appliance. This product has 

not been designed for any uses other than 

those specified in this manual. 

DO NOT 

modify the polarized plug to fit a 

non

-

polarized outlet or extension cord.

Keep appliance on a level surface. 

ONLY 

for domestic use.  

Industrial or commercial use invalidates 

the warranty. 
To reduce the risk of electric shock, this 

appliance has a polarized plug (one blade 

is wider than the other). This plug will fit 

in a polarized outlet only one way. If the 

plug does not fit fully in the outlet, reverse 

the plug. If it still does not fit, contact a 

qualified electrician to install the proper 

outlet. Do not change the plug in any way.

Summary of Contents for AIRSWIVEL BDASL100 Series

















Reviews: