background image

2

3

2

3

10

Maintenance And Care - Cleaning Dust Cup Filter

1. Remove the dust cup.

WARNING:

 

Turn off and unplug vacuum cleaner before performing 

maintenance to the vacuum cleaner.

3. Open the dust cup

    filter lid, located on 

    the top of the cup.

4. Remove the dust 

    cup foam filter.

2. Push the release

    button, open the dust 

    cup and clean all 

    parts of the dust cup.

    

Maintenance And Care - Cleaning Exhaust Filter

Locate and unlock filter cover as shown.

Push left to un-lock, right to lock.

LOCK

1

2

3

Wash with water every 3 months, allow at 

least 24 hours to dry and make sure it is dry 

thoroughly before re-using.

Remove filter cover with filter.   

Wipe with cloth over garbage bin,

removing dirt and debris.

filter cover

filter

Maintenance And Care - Cleaning Dust Cup Filter

 WARNING:

 

Turn off and unplug vacuum cleaner before performing 

maintenance to the vacuum cleaner.

Maintenance And Care - Cleaning Exhaust Filter

10

Maintenance And Care - Cleaning Dust Cup Filter

1. Remove the dust cup.

WARNING:

 

Turn off and unplug vacuum cleaner before performing 

maintenance to the vacuum cleaner.

3. Open the dust cup

    filter lid, located on 

    the top of the cup.

4. Remove the dust 

    cup foam filter.

2. Push the release

    button, open the dust 

    cup and clean all 

    parts of the dust cup.

    

Maintenance And Care - Cleaning Exhaust Filter

Locate and unlock filter cover as shown.

Push left to un-lock, right to lock.

LOCK

1

2

3

Wash with water every 3 months, allow at 

least 24 hours to dry and make sure it is dry 

thoroughly before re-using.

Remove filter cover with filter.   

Wipe with cloth over garbage bin,

removing dirt and debris.

filter cover

filter

10

1. Remove the dust cup.

3. Open the dust cup

 

filter lid, located on 

the

 

top of the cup.

4. Remove the dust  

cup foam filter.

filter cover

Locate and unlock filter cover as shown.

Push left to un-lock, right to lock.

Remove filter cover with filter. 

Wipe with cloth over garbage bin, 

removing dirt and debris.

Wash with water every 3 months, allow 

at least 24 hours to dry and make sure 

it is dry thoroughly before re-using.

filter

2.  Push the release 

button, open the dust 

cup and clean all 

parts of the dust cup.

Summary of Contents for AIRSWIVEL BDASL100 Series

















Reviews: