10
COMPACT BIDIRECTIONAL DUAL BUS AUTOSWITCHES
3. Quick Start
Listed below are four easy steps to set up your
Autoswitch.
1. Be sure to turn off the power to your computers and
printers.
2. Using an IEEE 1284 straight-through DB25 M/M
cable, connect your computers to the Autoswitch.
3. Using an IEEE 1284 parallel cable, connect your
printer to the Autoswitch.
4. Turn on the power to your Autoswitch, computers,
and printers. All computers will print to the printer
on a first-come, first-served basis.
Please print the README file on the diskette for
Autoswitch software-driver setup instructions.
