SM500A—Automatic Switching System
Black Box Corporation
36
990-000-0001-E8
PART NUMBER VERSION NUMBER
981-000-00
01 1.0 (Build 01)
5.3.12 SET RACK n CHANNEL c COM|A|B [name]
Use this command to set a label identifier to a port (COM, A, B) on a channel c.
Channels are identified by channel
c
(1-32).
The port identifier name has a maximum length of 8 characters. When the parameter
name
is
omitted the specified port label is cleared.
5.3.13 SET RACK n CHANNEL c PORT A|B
Switches channel
c
(1-32) to either port A or B
5.3.14 SET RACK n ECHO ON|OFF
Sets the echo on or off.
5.3.15 SET RACK n FACTORY DEFAULTS
Disables the SYSTEM GANG switching feature.
Clears all port identifiers for each channel.
Clears the rack identifier.
Sets the network configuration parameters to their default values:
IP ADDRESS
192.168.0.1
SUBNET MASK 0.0.0.0
Telnet Idle Timeout
5 minutes
Sets the SNMP configuration parameters to their default values:
SNMP TRAPS
DISABLE
SNMP MANAGER
0.0.0.0
Read Community Name
public
Write Community Name
private
5.3.16 SET RACK n GROUP m PORT A|B
Performs group switching on the rack.
A group is defined to be a set of 4 adjacent cards. The maximum number of groups on a rack
is 4. Values for parameter
m
will be 1 – 4.
The result of this command is that all channels in the group will switch to the specified port.
If any channel in the group failed to switch to the specified port, a SWITCH error is returned.
An invalid group is one that fails to have 4 adjacent cards. No channels are switched for
invalid groups, and a GROUP error message will be reported.
5.3.17 SET RACK n GANG PORT A|B
Requests a gang switch to port A or B.
5.3.18 SET RACK n SYSGANG PORT A|B
Requests a system gang switch to port A or B.
