SM500A—Automatic Switching System
Black Box Corporation
32
990-000-0001-E8
5.
Enter the desired ASCII commands as stated in the ASCII command section.
Figure 5.2. Typical connection for ASCII control. ASCII control for this configuration can access only
the first chassis in the system. System gang switching can be performed on all chassis.
5.3 ASCII Commands
This section describes the ASCII command grammar for managing the Automatic Switching
System SM500A via local control (COM1 serial port on the Advanced Control Card) or via
remote control/Telnet session (via Ethernet port on the Advanced Control Card).
Note: For all n variables, use RACK n = 1.
5.3.1 HELP
CONVENTIONS
[optional item] Optional items are enclosed in brackets
choice_1 | choice_2 Selections are separated by a vertical bar
HELP SUB-MENUS
HELP GET
HELP SET
OTHER COMMANDS
RESET RACK n
5.3.2 HELP GET
GET COMMANDS
GET RACK n CARDS
GET RACK n CHANNEL NAME
GET RACK n CHANNEL STATUS
GET RACK n DIPSW STATUS
GET RACK n NETWORK|SNMP CONFIGURATION
