7
CHAPTER 1: Specifications
1. Specifications
Compliance —
CE; FCC Part 15 Subpart B Class A, IC Class/classe A
Cable Required —
Between Delay Line Module and other devices: Four-pair
(eight-wire) Category 5 or higher shielded or
unshielded twisted-pair (STP or UTP)
Standards —
VGA, SVGA, XGA, or XGA-2 video
Interfaces —
Twisted-pair composite including VGA red, green, and
blue on three of the four wire pairs in a cable
Maximum
Distance —
Maximum total length of cabling from video source to
video destination will vary, depending on the type and
construction of the cables, but can be up to 1000 ft.
(305 m); patch cabling should be kept as short as
possible
Video Delay —
Three independent lines introducing 0 to 36 ns of delay
for each color, user-selectable in 3-ns increments
User Controls —
(12) Bottom-mounted pairs of 2-terminal slide switches
Indicators —
None
Connectors —
(2) Right-side-mounted RJ-45 female
Temperature
Tolerance:
32 to 104˚F (0 to 40˚C)
Humidity
Tolerance:
5 to 90% noncondensing
Enclosure —
Steel
Power —
Passive, nonpowered
Size —
1.2"H (including feet) x 4.7"W x 3.1"D (3 x 12 x 8 cm);
included patch cable is 3 ft. (0.9 m) long
Weight —
12 oz. (340 g)
