10
SDSL NETWORK EXTENDER 2000
3. Installation
3.1 The Complete Package
The SDSL Network Extender 2000 comes with a
Provider Unit, a Subscriber Unit, a power supply for
each Unit, and this manual. (The power supplies are
identical; you can use either one with either unit.) If you
didn’t receive everything, or if anything arrived
damaged, contact Black Box right away.
3.2 The Installation Procedure
Take these steps to install your Extender:
1. Referring to Table 3-1 on the next page, set the
DIP switch on the Provider Unit for the maximum
data rate that the Extender can support, given how
long the cable will be between the Provider and
Subscriber Units. If you don’t know how long the
cabling is, start at the setting for the shortest
distance/highest data rate; if the units can’t link
up at that speed when you interconnect them
later, try settings for progressively higher
distances/lower data rates until the link succeeds.
